Descargar Imprimir esta página

ESAB 0441 131 880 Instrucciones De Uso página 12

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
GB
1
INTRODUCTION
General
Accessory set for internal bore welding intended for use together with
tube welding tool A22 POC/POB.
Technical data
Accessory kit for internal bore welding
Order number
Working range
Electrode angle
Vikt
2
INSTALLATION
General
The installation shall be executed by a skilled person.
Fitting
Remove the support plate 01 and support tube 02.
S
Remove the outer casing of the tool 06.
S
Undo the welding cable clamp 07 (approx. 6 turns) and remove the
S
screws 03 och 04.
Pull out the electrode holder and link arm 05 far enough to allow the
S
welding cable to be disconnected from the electrode holder.
Refit the outer casing 06 and support tube 02.
S
Connect the internal bore welding kit 08 to the welding cable.
S
Pull the internal bore welding kit 08 into position using the welding
S
cable and secure it.
dqa5d1ea
0441 131 880
0441 132 880
0441 133 880
9,5 - - 15 mm
15- -20 mm
20- -30 mm
90_ to tube axis
3 kg
- - 12 - -

Publicidad

loading

Este manual también es adecuado para:

0441 132 8800441 133 880