Publicidad
Idiomas disponibles
Idiomas disponibles
contact with concealed power cables. Contact
between the saw chain and a live cable may
render metallic components live and result in an
electric shock.
n) This chainsaw is not suitable for felling trees.
Using the chainsaw for work other than that for
which it is intended may result in serious injury
to the user or other persons
SAFETY WARNINGS FOR BATTERY
a) Do not open the battery. Danger of short-
circuiting.
b) Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
c) In case of damage and improper use of the bat-
tery, vapours may be emitted. Ventilate the area
and seek medical help in case of complaints.
The vapours can irritate the respiratory system.
d) Use the battery only in conjunction with your
Vonroc product. This measure alone protects
the battery against dangerous overload.
e) The battery can be damaged by pointed objects
such as nails or screwdrivers or by force
applied externally. An internal short circuit can
occur and the battery can burn, smoke, explode
or overheat.
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD801AA and CD803AA type recharge-
able Battery packs with the charger. Other types
of batteries may burst causing personal injury and
damage.
a) The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non-rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
www.vonroc.com
the mains plug is damaged.
• Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm
cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
The cordless pruner saw is designed only for sa-
wing wood. This pruner saw is not suitable for fel-
ling trees. The device is not intended for any other
types of application (e.g. cutting masonry, plastic
or food). Using the pruner saw for work other than
that for which it is intended may result in serious
injury to the user or other persons.
This device is not suitable for commercial use.
The device is designed for use by adults.
The manufacturer is not liable for damages, which
were caused through use in applications for which
it was not designed, or incorrect operation.
The cordless pruner saw may only be used by one
person and for sawing branch.
The pruner saw must be held with the right hand on
the handgrip and the left hand on the grip surface.
Before using the pruner saw, the user must read
and understand all information and instructions
in the instruction manual. The user must wear
appropriate personal protective equipment (PPE).
Only branch may be sawed with the pruner saw.
Materials such as plastic, rock, metal or wood con-
taining foreign bodies (e.g. nails or screws) must
not be processed!
Function description
The cordless pruner saw is equipped with a chain
quick tensioning system. The circulating saw chain
is guided over a blade bar (guide rail). The device is
provided with various protective devices to protect
the user.
Refer to the following descriptions for the function
of control elements.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
. If you use an extension
2
EN
7
Publicidad
