Signature Hardware SKSHI3601S Manual De Instalación página 5

en-us_main.book.book Page 5 Thursday, February 22, 2024 4:27 PM
INSTALLATION
Before Installing
Before You Begin
IMPORTANT:
• Installer: In the interest of safety and to
minimize problems, read these installation
instructions completely and carefully before you
begin the installation process. Leave these
installation instructions with the customer.
• Customer: Keep these installation instructions
for future reference and the local electrical
inspector's use.
APPLIANCE DATA PLATE
• The appliance data plate contains the model and
serial number information and the electrical
requirements.
• It is located inside the hood behind the filters on
the back side of the chassis. Remove the filters to
view it.
All specifications subject to change without notice.
SIGNATURE KITCHEN SUITE assumes no liability
for changes to specifications.
Product Specifications
General Specifications
Model SKSHI3601S
Width 34 3/8"
(87 cm)
Weight 41.8 lb. (19 kg)
Fan speed 5
Filter 2 ea
Total Connect 120 VAC, 60 Hz
Load 4 Amp.
Light 120 VAC, 12 W
LED light strip
SKSHI4801S
46 3/8"
(118 cm)
59.5 lb. (27 kg)
3 ea
120 VAC, 60 Hz
7 Amp.
120 VAC, 12 W
LED light strip
INSTALLATION 5