SICE S 65 Manual De Instrucciones página 68

Installing the wheel guard
with the corresponding
mounting (Fig. 4)
- Fit the protective support on the pin
located on the head;
- Turn the mounting to align the holes
on the support itself with the holes on
the pin; then fix the two parts using the
included screw (Fig. 4).
WARNING
Adjust the height of the feet on the machine
support platform so that the machine is
stably positioned on the ground. Then
block the feet in this position, tightening
the checknut.
68
B
A
G
F
3b
User manual S 65
3c
4