SICE S 65 Manual De Instrucciones página 83

The balancing programmes are grouped within the balancing programmes icon in the
main working screen.
Select the icon
The following balancing programmes are available:
This balancing mode is the most commonly used one and the wheel balancer considers
it standard; If the user is using a different balancing programme, then select the dynamic
balancing programme icon
The following video page relating to this programme appears on the screen.
Now proceed as follows:
1. Set the wheel's geometric data.
2. Spin the wheel lowering the guard or by pressing the START key and the button in
the version without guard.
To obtain the most accurate results, do not apply any undue stress to the machine
during wheel spin.
3. Wait for the wheel to stop automatically and for the calculated unbalance values to
be displayed.
4. Select the first side to be balanced.
5. Turn the wheel until the central element of the corresponding position indicator lights
up.
User manual S 65
and press the keypad Enter button
Dynamic balancing (STANDARD)
.
.
12
83
UK