RugGear RG930i Guía Rápida página 6

WARNING WARNING
Do only change the microSD card when the device is switched off. Do only change the microSD card when the device is switched off.
Do not try to insert or remove the microSD card when any external power supply is connected, otherwise the Do not try to insert or remove the microSD card when any external power supply is connected, otherwise the
microSD card may be damag. microSD card may be damag.
Note: Note:
Make sure that the rubber cover on the earphone and USB connector of the device are fully sealed to ensure Make sure that the rubber cover on the earphone and USB connector of the device are fully sealed to ensure
complete waterproofing and dustproofing. complete waterproofing and dustproofing.
No special declaration will be made in the future. No special declaration will be made in the future.
7.3. CHARGING
The RG930i supports 5V/2A charging, Only use valid RugGear licensed chargers and cables because unlicensed
products may cause the battery to explode or damage the device.
The device must only be charged in an ambient temperature range of +0°C to +45°C. The normal operating
temperature of this mobile phone is -10°C to 50°C.
8. FUNCTION INTRODUCTION
8.1. FUNCTION KEY (M1/M2)
Function keys (M1/M2) are custom keys. You can choose and modify the features that you want to. When you
use it for the first time, it must be set it in your APP (CustomKey), as below.
8.2. Multifunctional Alarm (LWP)
The multifunctional alarm is the feature that detects the status of the mobile phone status during motion and
rest and automatically notifies the emergency contact via phone call/SMS.
1. Default password: 1122.
2. After opening the application for the first time, a default phone number is requireed to be set for the alarm.
3. If the mobile phone uses two SIM cards, a default phone number is required to be set for calling/SMS.
6
Customkey
PTT
SOS
Camera
Vibrate/Silence
Navigation