ARENDO 303751 Manual De Instrucciones página 12

3. Fill the tank with tap water. Use the measuring cup supplied. Make sure that
you do not fill more than 100ml of water. Then add 1-2 drops of any essential
oil or aroma. Make sure that water is present in the diffuser.
4. Place the lid of the diffuser on the device and make sure that it has been
fitted properly.
5. Finally, plug the hollow plug power supply unit into a properly connected
socket. The diffuser is now ready for use. To turn it on, press the „MIST"
button. By pressing the „MIST" button again, you can choose between the
timer functions (1H, 3H, 6H, ON). The appropriate active timer function
lights up. When the status LED „ON" is lighted, the device is permanently on.
If you want to turn off the timer, press the „MIST" button until the status LED
„ON" lights up and the device is permanently on, or until no status LED lights
up and the device is turned off.
6. "LED On/Off" button
With the "LED On/Off" button, it is possible to adjust the light of the diffuser.
Pressing the button for the first time switches on the colour-changing function.
Pressing the button repeatedly changes between the individual colours in two
different brightness levels.
12
English