Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
3
Connect the RJ45 port on the transmitter to the RJ45 port on the
receiver using Cat5e/6 cable.
Note: See the installation diagrams for maximum extension distance at 1080p
and 1080i video resolutions.
4
Connect the receiver unit's built-in HDMI cable to an HDMI monitor
input port.
Connect the included USB Micro-B cable to the receiver unit and a
5
USB port on the display or USB wall outlet. The green LED on the
receiver's RJ45 port will illuminate to indicate it is receiving power
from the USB Micro-B cable.
Power on the DisplayPort source and HDMI display. The orange
6
LED on the receiver unit's RJ45 port will illuminate to indicate it is
receiving a signal from the source.
If necessary, use the Equalization control to adjust the video image.
7
Note: An improper Equalization setting can result in no image being displayed at
all. If an image is not displayed on your monitor, try adjusting the Equalization.
4
23-08-380-9338B3.indb 4
23-08-380-9338B3.indb 4
3/4/2024 4:28:31 PM
3/4/2024 4:28:31 PM
Publicidad
