Electrex DC 164S Manual De Instrucciones página 14

LIFTIG welding
For DC 164 and DC 204 DC (See items in Fig. 3 A)
Item Letters
1 IP
Attention! The parameters below don't have a LED indicating their selection
Item Letters Parameter
TUP
NA UP SLOPE
NA AOF
Pulsed LIFTIG welding – the welding current oscillates between a high and a low current value
allowing less thermal input in thinner plates and greater arc control.
Attention! The parameters below have no LED indicating their selection.
Item Letters
NA IB
UTH
NA
NA Fre
FREQUENCY
- Start welding.
A - DC 164 and DC 204
Fig. 3 – LIFTIG parameters
Parameter
I / I Adjust the main current value.
2 p
Rise time to main current.
ARC OFF Voltage regulation that allows the arc to be extinguished at an
adjustable distance without damaging the workpiece.
Parameter
I Adjust welding base current in percentage of main current.
b
WIDTH Adjust width of the peak current (main).
PULSE Adjust the pulse frequency.
Description
Description
Description
14