stayer SCR255W Manual De Instrucciones página 28

Symbols
Important notice: Some of the following symbols could have meaning for the use of your tool. Please take note of the
symbols and their meaning. The correct interpretation of the symbols will help you to use the tool in a better and safer
manner.
Symbol Name
V Voltos
A Amperes
Ah Amperes-hours
Hz Hertz
W Watt
Nm Newton-meter
kg Kilograms
mm Milimetre
min/s Minutes/seconds
ºC/ºF Degrees Celsius/Degrees Fahrenheit
dB Decibel
Ø Diameter
-1
Revolutions per minute/no load speed
min
Class II construction
Warning symbol
Warning symbol
Warning symbol
Warning symbol
Warning symbol
Warning symbol
Note symbol
Note symbol
ENGLISH
27
Meaning
Voltage
Current
Capacity, quantity of stored ectrical energy
Frequency (cycles per second)
Power
Unit of energy
Mass, weight
Length
Time
Temperature
Unit of relative loudness
Size of drill bits, grinding wheels, etc.
Rotational speed at no load
Designates double insulated constructed tools
Alerts user to warning messages.
Read and understand instructions before operation.
Provides information for correct handling, e.g.,
read the operating instructions.
Danger area! Keep fingers, hands or arms away
from these areas.
Wear protective glasses.
Wear hearing protection.
Wear dust protection mask.
Observe the dimensions of the saw blade. The
hole diameter must fit the tool spindle without play.
Do not use reducer pieces or adapters.
Tool, accessories and packaging should be sorted for
environment-friendly recycling. The plastic components
are labelled for categorised recycling.
Marking of electrical and electronic equipment in
accordance with article 11(2) Directive
2002/96/EC (WEEE).
27