PIAB PNP NO LM8 Manual De Instrucciones página 3

VACUUM SWITCH
For stability, use a regulated DC power supply. Surge-absorbing circuits
(diodes, varistors, etc.) are necessary if inductive loads such as relays
and solenoids are connected to the same power line as the product. If
using a DC power supply unit such as a switching power supply, the FG
terminal should be earthed.(See the figure below.)
Use PH neutral detergents to clean the body. Do not use lacquer thinner
and other solvents for cleaning.
WARRANTY
This product is covered by a warranty for a period of one year from the date
of delivery. This warranty covers free-of-charge repair and replacement for
defects occurring through the design or manufacturing inadequacy. Even
during the warranty period, the following failures will be handled on a fee
basis.
1. Failures or damages caused by improper use or misoperation performed
not following the instruction manual.
2. Failures or damages caused by improper modification, adjustment or
repair.
3. Failures or damages caused by natural calamities, fires or other inevitable
accidents.
MODEL NUMBERS
Art. No.
0107731
( ) Compliance with EMC standards
Description
Vacuum switch PNP NO LM8
3