Publicidad
Idiomas disponibles
Idiomas disponibles
Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING: To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they
give are no substitutes for proper accident prevention
measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING: The operation of any power
tools can result in foreign objects being
thrown into your eyes, which can result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles
or safety glasses with side shields and a full
face shield when needed. We recommend a
Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with
side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Indicates a potential personal
Safety Alert
injury hazard.
To reduce the risk of
Read &
injury, user must read and
Understand
understand the operator's
Operator's
manual before using this
Manual
product.
Wear close-fitting safety
Wear Eye
glasses, earplugs or ear muffs
& Head
and a safety hard hat with
Protection
chin strap
Protect your hands with
Wear
gloves when handling saw
Protective
and saw chain. Heavy-duty,
Gloves
nonslip gloves improve your
grip and protect your hands.
Wear Safety
Wear non-slip safety footwear
Footwear
when using this equipment.
To prevent electrocution,
do not operate within 15
Keep sufficient
m of overhead electrical
distance away
lines. Contact with or use
from electrical
near power lines may cause
power lines
serious injury or electric
shock resulting in death.
This product is in accordance
CE
with applicable EC directives.
This product is in accordance
UKCA
with applicable UK legislation.
Waste electrical products
should not be disposed of
WEEE
with household waste. Take to
an authorized recycler.
Guaranteed sound power
level. Noise emission to the
XX
Noise
environment according to
the European community's
Directive.
IPX5
IP symbol
Protection against water jets
V
Volt
Voltage
mm
Millimeter
Length or size
cm
Centimeter
Length or size
kg
Kilogram
Weight
POLE SAW ATTACHMENT — PSX2500
EN
5
Publicidad
