Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Risk of separation :
Failure to observe the safety and operating
instructions may result in violent separation of the
pump components. The strainer cover must be
properly secured to the pump housing with the
strainer cover locking ring. Before servicing the pool
and spa circulation system, all system and pump
controls must be in the off position and the filter
manual air relief valve must be in the open position.
Do not operate the pool circulation system if any
component of the system is improperly assembled,
damaged or missing. Do not operate the pool
circulation system if the filter air release valve body is
not in the closed position. All suction and discharge
valves MUST be OPEN when starting the circulation
system.
Failure to do so may result in serious injury and/
or property damage. NEVER operate or test the
circulation system above 2.75 bar.
Publicidad
