Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for use
•
Remove the food tank from the body of the pet feeder by gently pulling it upwards.
•
Install a micro SD card (max. 128GB) in the slot on the pet feeder's body, inside the
compartment where the food tank is mounted.
•
Mount the food tank back in its location.
•
Remove the lid from the tank by pushing the two side buttons inwards.
•
Fill the tank with dry food. Diameter of dry food: 2 - 10 mm.
•
Put anti-moisture gel in the compartment under the lid.
•
Put the lid back on the food tank.
•
Install 3 LR20 alkaline batteries in the compartment located under the pet feeder. The
batteries are a backup power supply when there is no current at the outlet. Warning:
please do not try to charge alkaline batteries.
•
Power the pet feeder to a 230V power source using the USB cable and the included
230V - 5V power adapter.
•
Add the pet feeder to the Tuya Smart app for remote control.
Tuya Smart app
Note: Due to the numerous updates of the Tuya Smart application, the images and
information described in this manual may be different from the version you have installed.
•
Install the Tuya Smart application by
scanning the attached QR code.
•
Activate the Location and Bluetooth function on the phone.
•
In the main interface of the application, press the "+" button to add a new device.
•
Select the category "Small Home Appliances" - "Pet Feeder (Wi-Fi)".
•
Input the Wi-Fi (2.4GHz) network password.
•
In the following interface, press "Next".
•
Confirm that the LED on the device blinks often. If the green LED does not blink often,
long press the central button to put the device in pairing mode. The green LED will start
blinking rapidly and 2 beeps will be heard every 15 seconds.
•
After the application identifies your device, press the "Done" button to complete the
configuration procedure. The green LED remains constantly on.
English
4
User manual
Publicidad
