Bresser TemeoTrend NBF Manual De Uso página 44

NOTE!
To quickly increase or decrease a value simply
press and hold the up or down arrow button.
MANUALLY SETTING THE TIME, DATE, LANGUAGE (GERMAN,
ENGLISH, SWEDISH, DUTCH, SPANISH, ITALIAN, FRENCH),
TEMPERATURE FORMAT (°C/°F) AND TIME FORMAT
(12/24HR).
If it is not possible to receive a signal at your current location, you
can also set the time and date manually. To access this setting mode
please press and hold the MODE button for approx. 3 seconds
while the time is being displayed together with the seconds or the
weekday. You can now alter the respective values by pressing the
up and down arrow buttons. You can then confi rm these values and
jump to the next value by briefl y pressing the MODE button. When
you have fi nished setting all of the values, press the MODE button
again to return to the time mode.
Setting the time zone:
To access the setting mode for the time zone please press and hold
the MODE button for approx. 3 seconds while the time zone is being
displayed together with the seconds or the weekday. Select your
desired time zone using the up or down arrow button and confi rm
your entry by pressing the MODE button again.
SETTING, ACTIVATING AND DEACTIVATING
THE THREE ALARM TYPES
The base station is equipped with a weekday alarm (recurring MON-
FRI), a single alarm (non-recurring) and a pre-alarm (only active if the
external temperature falls to +2°C or below +2°C). The pre-alarm can
be set in such a way that if the temperature drops to 2°C or below
2°C it sounds 15, 30, 45, 60 or 90 minutes before the set weekday
alarm or single alarm. This ensures you are awoken earlier than the
set alarm time in the event of poor weather conditions (primarily du-
44