Getting Started; Pack Content; Telephone Connection - HumanTechnik flashtel comfort II f Instrucciones De Servicio

Getting started

Pack content

The telephone comes with the following parts:
• Telephone base unit
• Telephone receiver
• Receiver cord
• Telephone cable
• SOS hand-operated transmitter and pendant cord
• Velcro-fastening armband for the radio transmitter
• Guarantee card
• Operating instructions
• Speed-dial inlay card
• Mains adapter

Telephone connection

1. Insert the receiver cord (spiral-shaped cable) into the jack marked
with a receiver symbol on the left side of the base unit and into
the receiver.
2. Insert the smaller plug for the telephone cable into the "LINE"
jack (back of the base unit). Insert the larger plug into the socket
for your telephone line.
3. Insert the plug-in mains adapter cable into the "AC 9 V" jack.
Plug the mains adapter into a 230 V mains socket.
Warning!
Don't place the telephone close to televisions, VDUs, fans, etc. so as
to minimize the risk of interference. Don't place the telephone in
direct sunlight or close to a source of heat.
Only use the original telephone cable or a comparable cable with an
international configuration.
English 37