Bissell PET HAIR ERASER TURBO REWIND 2790 Serie Manual Del Usuario página 5

Assembly
Go to support.BISSELL.com for assembly videos.
1.
Slide end of wand into top
of base. It will "click" when
inserted correctly.
4.
Attach end of hose to
vacuum by sliding square cuff
into the bracket below the
Power Switch.
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
2.
Attach Stretch Hose by lining
the tabs on the circular cuff
with the notches on the back of
the handle. Twist clockwise to
lock hose into place.
5.
Install optional Febreze
filter by twisting tank cover
to unlock position and pulling
up on the handle. Remove the
Pre-Motor Filter and replace
with Febreze filter. Reinstall
tank cover when done.
3.
Press the Dirt Tank Release
Button and pull tank away
from the vacuum to remove.
6.
Place the Dirt Tank on
the vacuum by securing the
bottom in place first, then push
back until you hear a "click".
BISSELL.com 5