8.3.1.
Sett ing the date and time
Select the desired hour format (12/24) and confirm your selection.
Select the medium that you want to use to update the time (UPDATE FROM DAB,
UPDATE FROM FM, UPDATE FROM NETWORK, NO UPDATE) and confirm
your selection.
If you have selected UPDATE FROM NETWORK option, configure your time zone in
the next dialogue window.
Set daylight saving time to ON or OFF and confirm your selection.
If you have selected the last option (NO UPDATE), proceed as follows to set the time ma-
nually:
The digit position for the day flashes.
Select the day and confirm your selection.
The digit position for the month flashes.
Select the month and confirm your selection.
The digit position for the year flashes.
Select the year and confirm your selection.
The digit position for the hour flashes.
Select the hour and confirm your selection.
The digit position for the minutes flashes.
Select the minutes and confirm your selection.
8.3.2. Establishing a connection to a network
Please also refer to the user manual of your router for the following steps to connect to a net-
work.
Select whether the network should always remain connected to the appliance (even in
standby mode) and confirm your selection.
The appliance searches for available networks. The networks found are then displayed with
their name (SSID) in a list. WLAN access points that provide a connection via WPS are indica-
ted with [WPS]. Beneath this, you will see the following entries:
– RESCAN: Start a new search
– MANUAL CONFIG: Enter connection data manually
Now select the WLAN access point to which you want to connect the appliance. Confirm
your selection.
To connect to an encrypted network, observe the following sections.
With an unencrypted (open) WLAN access point, the internet radio establishes a direct con-
nection and the set-up wizard ends here.
182