Amazon Basics B08291MFPB Manual Del Usuario página 12

EN
» The temperature range is between
62 - 86 °F (17 - 30 °C)�
» When the room reaches the set
temperature, the heating function stops
automatically�
» If the product detects a drop in
temperature, the heating function
resumes automatically�
8.3 Changing power level
Press the power level button (P) to cycle
through the different power settings� The
display (D) show the below symbols to
indicate the power level selected�
650 W
1300 W
8.4 Changing flame color
» Press the flame color button (N)
repeatedly until the desired color is
selected�
» The display (D) shows the code to
indicate the color selected�
» When using F0 mode, press the flame
lock button (O) at anytime to stop the
loop� Press the flame lock button (O)
again to resume�
F1 Orange
F2 Orange and green
F3 Green
F4 Green and blue
F5 Blue
F6 Blue and orange
F7 Blue, orange and green
F8 Blue and red
F9 Red
F0 Loop through all colors
8.5 Changing ember color
» Press the ember button (J) repeatedly
until the desired color is selected�
12
Low power
High power
» The display (D) shows the code to
indicate the color selected�
» When using C0 mode, press the charcoal
lock button (K) at anytime to stop the
loop� Press the ember lock button (K)
again to resume�
C1 Red
C2 Blue
C3 Green
C4 Rose red
C5 Orange
C6 White
C7 Purple
C8 Yellow
C9 Light blue
C0 Loop through all colors
8.6 Setting timer
» Press the timer button (M) repeatedly until
the desired time is selected�
» Display (D) shows the selected hour
for 7 seconds, then displays room
temperature� The timer automatically
starts counting down�
» Timer function can be set between 1 - 9
hours�
» To turn off the timer, press the timer
button (M) repeatedly until display (D)
shows �
8.7 Changing between Fahrenheit and
Celsius
» Press and hold the temperature button (L)
on the control panel for 5 seconds�
» Display (D) changes to show the desired
setting�
» Repeat the above steps to change back
to original setting�