Publicidad
Idiomas disponibles
Idiomas disponibles
Clean the wetted pad (map2, map3)
➢
Cut off the power supply, take down the air filter screen, then draw the wetted pad from support. Clean
the wetted pad with neutral detergent and banister brush, then clean it with clear water. Finally, reinstall
to the appliance.
Attention: the wetted pad must be installed horizontally, in order to avoid leaking.
Clean the water tank (map 4)
➢
Cut off the power supply, open the door, take out the water tank, clean it with neutral detergent, and
wash it with clear water, then reinstall to the appliance.
Clean the shell
➢
Clean with neutral detergent and soft cloth.
Attention: cut off the power supply when clean the appliance, as there has a high pressure in the body.
Do not leave any water on the surface of control panel.
MALFUNCTION AND MAINTENANCE
Malfunction
No action
Poor effect of dedusting
Repair the appliance under the situation as follows:
Abnormal action or no action. It is invalid by the above approach.
➢
Abnormal action caused by ingress of water or corpus alienism.
➢
ASSEMBLING AND WATERING
1. Assemble castors: put the appliance on a flat surface, take out the wrench from foam box, then
assemble the castors on the bottom of the appliance.
2. Fixed Installation as follows:
3. Take out the product's fixed frame and screw bag.
4. Fix one side of frame by one screw on the back of product
5. Fix another side of frame with screw on the wall
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
13
Causes
3.
Power off or poor
connection.
4.
Not press the "ON/OFF"
key on the control panel.
3.
Block the air filter screen
with dust.
4.
Block the air inlet with
corpus alienum.
www.eshopping.de
Solution
3.
Plug the power cord and
make sure it connects
well.
4.
Press the "ON/OFF" key
on the control panel.
3.
Purify the air filter screen.
4.
Remove corpus alienum
from the air inlet.
Publicidad
