JVC LT-32FD300 Manual De Instrucciones página 98

USING THE MENUS
Your TV supports ARC (Audio Return Channel).
When your AV Receiver supports ARC, you must
connect the TV and the AV Receiver with an HDMI
cable to enable the TV to send audio signals.
• With the Connect the HDMI cable from the HDMI
IN (ARC) port on your TV to the ARC HDMI out
connector on your AV receiver.
• Set the audio input mode of your AV receiver to TV
audio mode.
• To use ARC, you must turn on HDMI control in
the menu of the receiver following the instruction
manual of your receiver.
To turn on the HDMI ARC function on your TV
1. Press the MENU button to display the setup menu.
▼
2. Press the button until the HDMI CEC option is
highlighted. Press the ENTER button to display the
submenu.
▼
3. Press the button to highlight the Audio Receiver
item.
◄/►
4. Press the button to select On.
5. Press the EXIT button to exit from the menu.
USB MULTIMEDIA
1. Switch off the TV before connecting any USB
storage device.
2. Connect your USB storage device to the USB port
of your TV.
3. Press the button on the back of the TV or the
button on the remote control to turn on your TV and
your USB storage device.
4. Press the SOURCE button on the remote control
to display the Source List. Use the ▲▼ buttons to
select Media and then press the ENTER button to
confirm.
Viewing Photo
1. Press the SOURCE button on the remote control
then press the ▲▼ buttons to select MEDIA and
then press the ENTER button.
2. Press the ◄ ► buttons to select Photo and then
press the ENTER button.
3. Press the ▲▼◄ ►buttons to navigate in the
picture folder and then press the ENTER button. If
you want to select the specified photos, press the
▲▼◄ ►buttons to select the picture file and then
press the ENTER button.
4. Press the ENTER button to view.
Photo Music Movie Text
13