Positioning the Digital Camera in the
Waterproof Case
Before installation, check the following:
• To avoid losing power while shooting underwater, charge the battery fully
before use.
Full recharging times for completely depleted battery
NP-70 : approx. 2.5 hours
• Check how many new images can be stored on the media.
• Remove the hand strap from the digital camera. Using the camera in the
waterproof case with its strap may cause the case to leak.
1
Turn the camera off.
The trigger of the zoom switch protrudes slightly off center, but the "pointer"
is centered. When using the zoom switch, note its position.
2
Open the waterproof case (p.8) and set the camera in it.
Pointer
Slip the camera into the waterproof
case until it stops securely.
When opening the waterproof case,
take care not to catch your fingers or
palm in the waterproof case.
EN-11