Publicidad
Idiomas disponibles
Idiomas disponibles
3.5
Shoulder Bolsters
The Shoulder Bolsters provide upper torso support,
protection and containment and accommodate
asymmetries in the chair user. Their unique design
allows for proper elbow access to the arm rest. The
Shoulder Bolster is always used in conjunction with the
side wing.
To Attach the Shoulder Bolsters:
-Feed both Shoulder Bolster straps between the inner
strap of the wing and the frame of the chair.
-Secure the buckles and cinch the straps to secure the
bolster to the wing. The bolster can be slid up and
down the wing if desired.
Note: The Shoulder Bolster can be inverted on the
wing in order to provide support to narrower residents.
3.6
Height Adjustable Armrests
The armrest height can easily be adjusted in order to
accommodate various residents. The armrest height
should be adjusted to provide correct arm support for
the resident as determined by the caregiver.
To Adjust the Armrest Height:
-
Squeeze the pins together which are located under the
armrest flap.
WARNING: DO NOT place fingers at the top of
the pins as this could cause pinching. Place fingers
in the concave shape of the pins.
-Raise or lower the arm to the desired height.
WARNING: DO NOT place fingers anywhere
underneath the arm while adjusting, as this could
cause pinching. Upon releasing the pins the armrest
height will lock into place.
Secure the outside flap on the side panel.
12
!
2
1
Publicidad
