Water Tech PRECISION V10 Manual Del Operador página 9

English
1. Vacuum Head with Brushes - (P50X006)
2. Brushes
3. Wheels
4. Vacuum Head Assembly- (P50X006G)
5. Universal Vacuum Head Adapter - (P41X200)
6. Nose Cap - (P50X002)
Only use the battery charger supplied with the cleaner.
Specifications
Battery Charger Input....................................................................100-240V-50-60Hz, 800 mA Maximum
Battery Charger Output.....................................................................................................12.6V,
Water Temperature Range..............................................Maximum 100°F, (37.7°C) Minimum 41°F, (5°C)
Operation Depth............................................................Maximum 12 ft. (3.5 m), Minimum 10 in. (0.25 m)
Charge temperature........................................................Maximum 100°F, (37.7°C) Minimum 41°F, (5°C)
A
Charging Your Cleaner
Initial Charge 6 Hours
Recharging (After Complete Discharge) 6 Hours
Maximum charging time should not exceed 12 Hours
B
Adding the Brushes
Brushes
• Brushes are added to the vacuum head.
(Figure B)
• Different configurations are available.
(6 Brushes Total)
C
Filter Assembly
D
Attaching the Vacuum Head
(Figure D.1 without adapter)
(Figure D.2 with adapter)
E
Attaching the Pool Pole
F
Turning the Cleaner On and Off
G
Shallow Water Cleaning
Connecting the Shallow Water Adapter
1. Locate the Shallow Water Adapter and Precision
Intake hose included with your unit.
2. Take the Shallow Water Adapter and firmly push it
onto the end of the Precision Intake until it clicks
Return non-working electrical equipment to a facility appointed by your municipality that properly recycles electrical and electronic equipment.
Do not dispose them in unsorted waste bins. For items containing removable batteries, remove batteries before disposing of the product.
7. Shallow Water Cleaning Adapter – (P50X880)
8. Xtreme Multilayer Filter Bag - (P50022XF)
9. Shell
10. Charger - (LC099-3S2PK)
11. Spring Clip
12. Motor Box Assembly - (P40X003G3)
Environmental Program(s), WEEE European Directive
Please respect the European Union regulations and help to protect the environment.
2.0A
Head and Hose Attachment (part No: P30X882)
To purchase, contact your retailer or call us at (732)-967-9888
into place. You may need to twist it slightly to lock
the connections.
3. Once the Shallow Water Adapter is securely attached to the
Intake, connect the other end of the Intake to the hose.
Starting the Cleaning Cycle
1. Once the Shallow Water Adapter is connected to the Precision
Intake and hose, place the entire Precision cleaner body into
the water.
2. Ensure the Precision cleaner is fully submerged under water.
The body must be completely covered by water to generate
proper suction.
Note: Do not operate the Precision cleaner unless the body is totally
underwater. Running the unit out of water may damage the suction
components.
H
Maintenance
Long Term Storage
• Always clean the Nose Cap and Filter Bag before storing.
• Always store and charge your cleaner in a cool, dry indoor shelter.
• Recharge the cleaner for 6 hours after each month of inactivity.
• Never leave your charger connected to the cleaner for more
than 24 hours.
Cleaning the Filter Bag
• You should remove and clean the Filter Bag following each use.
(Figure H.1)
• Don't scrub the bag against itself while rinsing it.
(Figure H.2)
Help protect the environment.
13. Sand & Silt Filter Bag - (P50022SS)
14. All-Purpose Filter Bag - (P50022AP)
15. Shoulder Strap - (PROW070)
16. Car Charger - (LC099-3S2PK-CR)
17. EU Adapter - (099-3S2PK-EU)
ADDITIONAL PARTS AVAILABLE:
Environmental Recycling Programs USA
9