Publicidad
Idiomas disponibles
Idiomas disponibles
APPARTAMENTO
2
- UNPACKING
Before proceeding, the machine
installation personnel must read
these instructions and, in par-
ticular, the previous sections
regarding general information
and safety requirements.
2.1 Contents of the packaging
The machine is supplied fully assembled
(with the exception of the accessories
contained in the special boxes - fig. 2.1).
MACHINE
UNDER
MAINTENANCE
fig_2.1
46
The machine data are indicated on the "CE"
marking plate applied under the machine
(fig. 2.2).
MACHINE
UNDER
The packed machine must be protected
MAINTENANCE
in a sheltered and moisture-free premises
until it is installed in a suitable environment.
After removing the packaging, it is required
to verify that the various components are
in perfect condition and that there are no
traces of tampering, damaged parts, etc.
It will also be necessary to check that the
machine is complete with all its parts, any
accessories and technical documentation
as per the transport documentation.
i
i
CAUTION! Before proceeding
with the installation, in case
anomalies are found in the
checks on delivery, report the
findings to the manufacturer.
The packaging elements
(plastic bags, expanded
polystyrene, nails, car-
tons, etc...) must not be
left within the reach of
children as they are po-
tential sources of danger.
These elements must
be disposed of in ac-
cordance with the local
regulations in force
fig_2.2
Publicidad
