Garant SB1 Manual De Uso página 50

GARANT Setting Bench SB1
de
Interval
According to in-house quality manage-
ment regulations (recommended: 1×
annually)
en
According to the applicable national
regulations
9.1. SPARE PARTS
cs
Order original spare parts from the Hoffmann Group Customer Service.
9.2. SYSTEM UPDATE
i
da
Do not switch off device while installing the update.
es
fi
fr
hr
hu
it
lt
ü Settings has been selected.
ü Update via internet: internet connection has been established.
ü Update via USB memory stick: memory stick connected with setting device.
nl
1. Select "Update & Restore".
2. Select "Search for Updates".
» The setting device loads updates, if required.
pl
» Restart message.
3. If updating via USB memory stick: remove memory stick.
4. Switching off [} Page 47] the setting device
» Setting device switches on automatically after installation.
ro
10. Storage
After use, cover the unit with the dust cover.
ru
If the unit is to be stored for an extended period, place it in the transport case in a dry place protected from light and dust at
temperatures between +5°C and +40°C and relative atmospheric humidity between 50% and 70%. Protect stored compon-
ents against mechanical shaking and damage.
sl
sv
50
Maintenance work
Perform manufacturer's calibration and
perform adjustments as necessary.
Check electrical equipment (including
the power supply unit).
Update & Restore
SB1 Update
Your System is already up to date. Last checked:
ü
Search for Updates
SB1 Restore
The SB1 can be reset to factory settings. All data and settings will be deleted.
Restore Factory-Defaults
Performed by
Hoffmann Group Customer Service
Trained specialist for electro-technical
work