Wesco WS5346 Manual Original página 11

PLUG REPLACEMENT (ONLY FOR
REWIRABLE PLUG OF UK & IRELAND)
If you need to replace the fitted plug then follow the instructions
below.
IMPORTANT
The wires in the mains lead are colored in accordance with the
following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of this appliance
may not correspond with the colored markings identifying the
terminals in your plug, proceed as follows. The wire which is
colored blue must be connected to the terminal which is marked
with N. The wire which is colored brown must be connected to
the terminal which is marked with L.
WARNING!
Never connect live or neutral wires to the earth terminal of the
plug. Only fit an approved BS1363/A plug and the correct rated
rated current fuse which is used in the plug.
Note: If a moulded plug is fitted and has to be removed take
great care in disposing of the plug and severed cable, it must be
destroyed to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
clamped
EN
Fuse
Brown L(live)
Cable grip
DECLARATION OF CONFORMITY
We,
POSITEC Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
Declare that the product
Description Electric Planner
Type Designation WS5346 (53- designation of
machinery, representative of planer)
Function removing surface material with a rotating cutter
Complies with the following Directives,
2006/42/EC
2011/65/EU & (EU)2015/863
2014/30/EU
Standards conform to
EN 62841-1,
EN 62841-2-14,
EN 55014-1,
EN 55014-2,
EN IEC 61000-3-2,
EN 61000-3-3
The person authorized to compile the technical file,
Name Marcel Filz
Address POSITEC Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
2023/2/11
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
11