AEG TSC8M181CS Manual De Instrucciones página 36

To adjust the temperature, refer to
"Temperature regulation".
4.6 ECO function
The ECO function sets the optimal
temperature to ensure food preservation
while minimizing energy consumption.
1. To activate the function press the ECO
button.
The fridge temperature is set to +4°C and the
freezer temperature to -18°C.
2. To deactivate the function, press the ECO
button again or select a different set
temperature (refer to "Temperature
regulation").
After deactivating the ECO function, the
fridge temperature is set to +2°C and the
freezer temperature to -20°C.
Activation of the ECO deactivates Extra
Cool and Extra Freeze functions.
The ECOMETER indicator shows the
appliance's current energy consumption.
Three fully lit bars indicate the most
energy-efficient setup.
4.7 Extra Cool function
With the Extra Cool function, you may rapidly
cool large amounts of warm food, for example
after doing grocery shopping, without
warming food already stored in the fridge
compartment.
To activate the function, press the Extra Cool
button.
The Extra Cool indicator lights up. When the
Extra Cool function is on, the fan may work
automatically.
This function stops automatically after
approximately 6 hours. Once the function is
off, the Extra Cool indicator goes out.
Press the Extra Cool button to deactivate the
Extra Cool function before it automatically
ends.
36 ENGLISH
To set a different fridge temperature,
switch off the Extra Cool function and
refer to "Temperature regulation".
4.8 Extra Freeze function
Extra Freeze function is used to pre-freeze
and fast freeze in sequence in the freezer
compartment. This function accelerates the
freezing of fresh food and, at the same time,
protects foodstuffs already stored from
undesirable warming.
To freeze fresh food, activate the Extra
Freeze function at least 24 hours before
placing the food to complete pre-freezing.
To activate this function, press the Extra
Freeze button.
The Extra Freeze indicator lights up. The
Extra Freeze function stops automatically
after a maximum of 52 hours.
Press the Extra Freeze button to deactivate
the Extra Freeze function before it
automatically ends.
4.9 High temperature alarm
When the temperature in the freezer
compartment increases (for example due to
an earlier power failure), the alarm indicator
flashes, the freezer temperature indicator
shows H° and blinks and the sound is on.
To deactivate the alarm, press any button.
The alarm indicator and sound go off. The
freezer temperature indicator shows H° for 5
seconds before indicating the freezer
temperature again.
The alarm restarts one hour after
deactivation until the normal conditions
are restored.
If you do not press any button, the sound
switches off automatically after around
one hour to avoid disturbing.