cecotec ENERGYSILENCE AERO 7200 PRO Manual De Instrucciones página 45

Box content
- Fan
- Remote control
- Assembly kit
- Instruction manual
3. ASSEMBLY
Assembly preparation
- To prevent personal injury and damage, make sure that the location where the appliance is
going to be installed allows a 2.3-metre clearance from the blades to the floor and a 76-cm
clearance from the blades to any wall or object. Fig. 3
- Make sure that the building structure can hold the full weight of the fan.
- This fan can be installed on a normal or vaulted ceiling with a downrod. The hanging length
of the fan can be extended with a longer rod. Fig. 4
- Ensure that the junction box is securely fastened to the building structure and can support
the full weight of the fan.
- Installation requires the following tools: screwdriver, flat screwdriver, adjustable pliers or
spanner, ladder, wire cutters and electrical tape.
Fig. 4 key:
A Standard assembly
B Sloped ceiling assembly
Installation of the mounting bracket
- Wooden ceiling. Fig. 5
- Concrete ceiling. Fig. 6
Drill a ⌀8 mm hole in the ceiling and insert the bolt. Align the bracket with the hole and
1.
tighten it with the nut.
Fan assembly and suspension. Fig. 7
Fig. 7 key:
1. Electric wiring
2. Hanging ball slot
3. Clevis
4. Adapter
5. Canopy
6. Decorative covers
ENERGYSILENCE AERO 7200 PRO
ENGLISH
45