User Responsibility - ESAB COOL 2 Manual De Instrucciones

US
3

USER RESPONSIBILITY

This equipment will perform in conformity with the description thereof contained in this manual and
accompanying labels and/or insert when installed, operated, maintained, and repaired in accordance
with the instruction provided. This equipment must be checked periodically. Malfunctioning or poorly
maintained equipment should not be used. Parts that are broken, missing, worn, distorted, or
contaminated should be replaced immediately. Should such repair or replacement become necessary,
the manufacturer recommends that a telephone or written request for service advice be made to the
Authorized Distributor from whom it was purchased.
This equipment or any of its parts should not be altered without the prior written approval of the
manufacturer. The user of this equipment shall have the sole responsibility for any malfunction which
results from improper use, faulty maintenance, damage, improper repair, or alteration by anyone other
than the manufacturer or a service facility designated by the manufacturer.
Read and understand the instruction manual before installing or operating.
PROTECT yourself and others. ARC PROCESS can be hazardous.
S
Before use, read and follow all labels, the manufacturer's instruction manual,
employer's safety practices, and Material Safety Data Sheets (MSDSs).
S
Only qualified persons are to install, use, or service the equipment
ELECTRIC SHOCK can kill.
S
Do not touch live electrical parts.
S
Always wear dry insulating gloves.
S
Insulate yourself from work and ground.
S
Disconnect input power before servicing the unit.
FUMES AND GASES can be hazardous to your health.
S
Keep your head out of the fumes.
S
Use enough ventilation, extraction at the arc, or both, to keep fumes and
gases from your breathing zone and the general area.
SPARKS AND SPATTER can cause fire or explosion.
S
Do not use near flammable material.
S
Do not use on closed containers.
ARC RAYS can injure eyes and burn skin. NOISE can damage hearing.
S
Wear the correct eye, ear, and personal protection.
MOVING PARTS can injure.
S
Keep away from moving parts.
S
Keep all doors, panels, covers, and guards closed and securely in place.
DO NOT REMOVE, DESTROY OR COVER THIS LABEL
bk12da
- 8 -
© ESAB AB2013