CE Conformity
This device complies with the requirements of the EEC directive 89 / 336 / EEC as amended
by 92/31 / EEC and 93 / 68 / EEC Art. 5 with regard to "Electromagnetic compatibility" and
73 / 23 / EEC as amended by 93 / 68 / EEC Art. 13 with regard to "Safety".
Required item
Relative to Standard Value
Relative to those Exceeding Standard Value
Remarks
EMI
#1
-
#4
ESD
#2
#3
-
RADIATED RF
#1
#3
-
TRANSIENT F/B
#1
#3
-
LINE HARMONICS
#1
-
-
#1 :Satisfies standards with no problems in performance and reliability.
#2 : Effects may appear temporarily on the screen but there will be no problem in reliability.
#3 : There is fear of the product breaking down.
#4 : If a signal cable other than that specified is used, it may be the cause of electromagnetic
interference to peripheral devices.
To assure continued CE compliance the user must use the provided 1.5 m shielded video signal
cable with bonded ferrite cores at both ends of the cable.
Handle correctly in accordance with the instruction manual.
EMI : Electromagnetic Interference
ESD : Electrostatic Discharge
RF : Radio Frequency
F / B : Fast Burst
Energy Star®
As an
Energy Star®
partner, Panasonic Document Imaging Company has determined
that this product meets the
Energy Star*
guidelines for energy efficiency.
Notice for Germany
Note:
• The sound pressure level at the operator's position according to IEC 704 - 1 :1982 is equal or less than
70 dB (A).
German
HINWEtS:
• Der Arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 betragt 70 dB (A) order weniger.
Notice for Japan
This is a Class B product based on the standard of the Voluntary Control Council for
Interference from Information Technology Equipment (VCCI). If this is used near a radio or
television receiver in a domestic environment, it may cause radio interference. Install and use
the equipment according to the instruction manual.
Japanese
(vcco
vmm\zm^<
cogan
WLmmmvmmTzztzBwtu
to
w* s i ££ c ir c <h
u £
S5US34^mleft o TIE LOUt V&l'£ LTT£ O„