Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical connection
1. The oven must be installed and connected correctly in its
place, according to the manufacturer's instructions from
an authorized technical service.
2. It is necessary to install the appliance in a well-ventilated
oven box.
3. The electrical connections of the device must be made
only with earth connections, installed in accordance with
the standards. Contact an authorized electrician if there is
no grounded plug where the appliance will be placed. The
manufacturer is not responsible in any way for damage
caused by the connection of ungrounded plugs to the
device.
4. The oven plug must be earthed. Check that the plug
is earthed. The plug must be located where it can be
accessed after installation.
5. The oven was manufactured with 220-240 V 50/60 Hz.
The appliance has alternating current, for which a 16 Amp
fuse is required. If the main current is different from these
values, consult an electrician or an authorized technical
service.
6. When you need to replace the electrical fuse, check that
the electrical connection is made as follows:
• Brown phase cable (to the active terminal)
16
AF BECKEN manual Forno multifuncoes BBIO5046 A5 (3).indd 16
AF BECKEN manual Forno multifuncoes BBIO5046 A5 (3).indd 16
06/05/2020 14:21
06/05/2020 14:21
Publicidad
