Publicidad
Idiomas disponibles
Idiomas disponibles
display. This indicates that an automatic cooking is programmed, but
cooking has not yet started.
4. After 6 seconds of pressing the last button or pressing the symbol
the setting is complete; the display will show the current time of
day.
Automatic cooking end
After automatic cooking is completed, the symbol
onLED display and the buzzer alarm will sound. Any button you press
will stop the alarm sound, but the flashing symbol will continue until
the button
if not interrupted.
Energy interruptions
After any power interruption in the network, your oven will be inactive
after power restoration, for safety reasons. Once switched on, the time
of day digits and the symbol
(see: turning on the oven).
Note: When the symbol
inactive and start it in manual mode.
Block for children
This function is intended to prevent any unauthorized modification of
the timer settings. This function will be active within 30 seconds after
the last button was pressed. The symbol will appear
Press the button
PROGRAMMING OPTIONS
Alarm Tone:
Press and hold the button
of the currently valid alarm sound. When pressing the buttons
, you can choose from 3 alarm sounds available. The last alarm tone
heard will be automatically recorded as the selected sound. After
6 seconds of pressing the last button or pressing the symbol
selection will be complete.
Multifunction Built in Oven | Horno Multifunción | Forno Multifunções
AF BECKEN manual Forno multifuncoes BBIO5046 A5 (3).indd 21
AF BECKEN manual Forno multifuncoes BBIO5046 A5 (3).indd 21
be held down. The buzzer alarm will sound for 7 minutes,
will flash and the time must be set
is flashing, this indicates that the oven is
for 3 seconds. The symbol
for 3 seconds, this will result inproduction
will be flashing
. To disable it,
will disappear.
and
, the
EN
21
06/05/2020 14:21
06/05/2020 14:21
Publicidad
