ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Wheel diameter
Max. wheel thickness
Max.cutting depth
Rated speed
Rated voltage
Max. permitted pressure of feed-water
Overall length
Net weight
Protection degree
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
Intended use
The tool is intended for cutting in metal materials with
an abrasive cut-off wheel and also masonry materials
with a diamond wheel.
Noise
The typical A-weighted noise level determined according to EN60745-2-22:
Model
CE003G
CE004G
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
CE003G
230 mm
3.0 mm
88 mm
-1
6,600 min
D.C. 36 V - 40 V max
603 mm
6.4 - 7.4 kg
BL4040 / BL4040F* / BL4050F* / BL4080F*
* : Recommended battery
DC40RA / DC40RB / DC40RC / DC40WA
PDC1200 / PDC1500
Sound pressure
Sound power level
level (L
) : (dB(A))
(L
pA
105
99
8 ENGLISH
CE004G
305 mm
5.0 mm
121 mm
5,000 min
5 bars
663 mm
6.7 - 7.7 kg
IPX4
Uncertainty (K) :
) : (dB(A))
(dB(A))
WA
116
110
-1
3
3