Publicidad
Idiomas disponibles
Idiomas disponibles
12. Reinstall the two screws to the rear of the searing burner
and one screw to the iginitor pin.
13. Replace side searing burner cooking grid.
14. Use an adjustable wrench to install Natural gas pressure
regulator and corrugated pipe to the corrugated pipe
connector.
15. Connect the brass connector on one end of the 10 ft (3.0
m) PVC flexible gas supply hose to the Natural gas
pressure regulator (A).
16. Connect the quick connector on the other end of the 10 ft
(3.0 m) PVC flexible gas supply hose to the rigid Natural
gas supply pipe (B).
A
B
17. Use screwdriver to install screw to hold the corrugate
connector to the enclosure.
Record Conversion
The LP appliance nameplate is located on the front side of the
burner firebox. Once converted, place the NG appliance
nameplate over the current LP appliance nameplate.
In the last page of the Use and Care Guide, write "Converted to
Natural Gas". Also record the conversion date and the
technician/company that performed the conversion.
20
Publicidad
