User Manual; To Make An Announcement; General Paging; Individual Paging Installations - EIS 400 Serie Manual De Uso E Instalación

EIS

3.1.1. General Paging

General intercom transmission is
transmission to address #0 and
which will be received by all control
units in the installation (except those
having the "do not disturb" function
activated).
Key
0
address
#0
Press the TALK button. The transmission lasts as long as the key is pressed and ends when the
key is released.
During the first tone the transmission LED will be red.
In the event there is an issue that hampers transmission (for example, the intercom channel is
busy at that time, the zone number directed to receive the transmission does not exist, etc.) the
ERROR message will appear on the display.
When the transmission LED turns GREEN, you may begin to talk. The microphone and the
intercom channel will be open as long as the TALK button is pressed.
6
As soon as the TALK button is released, the end tone sounds and the operation concludes.
3.1.2. Individual Paging
Individual intercom transmission is
transmission that will be received by a single
zone. To select this kind of transmission, use
that "individual zone address".
This operation is not possible in New 100
Series installations as these only allow for
general intercom transmission (see 2.1.1.)
Key in the
4 8
zone address
(for example,
zone 48).

3. User Manual

3.1. To make an announcement

3.1.3. Group Paging

Group intercom transmission is transmission that will be
received by a group of zones.
transmission, use that particular "group address".
This operation is not possible in New 100 Series
installations as these only allow for general intercom
transmission (see 2.1.1.). In all other cases, groups are
defined in the corresponding programming option (see
3.1.5.).
Key in the group address (for
example, group 3) and then press
the GROUP button. The
corresponding LED will be activated.
14
ENG
To select this kind of
3
(red)
T A L K
(green)
T A L K
(red)
T A L K