Changing The Traktor 2 Preferences; List Of Traktor Pioneer Ddj-T1 Edition 2 Setting Items; Assigning The Desired Functions To The [Needle Search] Pad - Pioneer DDJ-T1 Manual De Instrucciones

Changing the TRAKTOR 2 Preferences

Change TRAKTOR 2's environmental settings according to the usage conditions of your hardware.
For details on TRAKTOR 2's environmental settings, see the TRAKTOR 2 manual.
! If you wish to restore the changes to the environmental settings to their defaults, please check the following website.
http://www.prodjnet.com/support/
1 Click the TRAKTOR 2 [
button.
Open the TRAKTOR 2 settings menu.
2 Select the category and make the settings.
List of TRAKTOR Pioneer DDJ-T1
EDITION 2 setting items
Category Descriptions
Select the audio devices to be used for audio input/output.
Audio Setup
Set the sampling rate and latency.
[Internal]: Use TRAKTOR 2's internal mixer.
To use only with this unit, select [Internal].
Output Routing [External]: Use an external mixer.
Set the master audio output and monitor audio output
terminals.
Set the audio input from an external device (portable audio
Input Routing
player, microphone, etc.) to a deck.
Set the conditions and functions for loading tracks to the
Loading
decks.
Transport Set the tempo and key lock functions.
Set the track deck's waveform screen color, etc.
Decks
Mixer Set the auto gain, master limiter, etc.
Set the TRAKTOR 2 on-screen display for the global section,
Global Settings
etc.
Set the types of effects to be displayed when selecting
Effects
effects.
Set whether to record the TRAKTOR 2 master audio output
or the external audio input. Set the location where recorded
Recording
audio files are stored.
Set whether or not to display the preview player, cover art,
Browser Details
etc.
Make the settings for track importing, auto analysis, the
File Management analysis BPM range, etc.
Set the path to the data (music files, iTunes library files, etc.).
Controller
Assign TRAKTOR 2 functions to the controller, keyboard, etc.
Manager
Traktor Kontrol X1 Set this when using Native Instruments' Traktor Kontrol X1.
Assigning the desired functions to
the [NEEDLE SEARCH] pad
When assigning the desired functions to the [NEEDLE SEARCH] pad,
first press the [FUNCTION] button to turn [FUNCTION] on.
! Functions can be assigned to up to 5 points on the
[NEEDLE SEARCH] pad.
FUNCTION
Function1
1 Click the TRAKTOR 2 [
button.
Open the TRAKTOR 2 settings menu.
2 Click [Controller Manager].
24
En
(Preferences Button)]
NEEDLE SEARCH
Function3 Function5
Function2 Function4
(Preferences Button)]
3 Click [Device] under [Device Setup].
From the pull-down menu, select [Pioneer. DDJ-T1].
4 Click [Add In...] under [Assignment Table].
From the pull-down menu, select the function to be assigned.
5 Click [Learn] under [Device Mapping].
Turn [Learn] on.
6 Touch the [NEEDLE SEARCH] pad.
Touch the point at which you want to assign the function.
The name of the point touched is displayed in the field to the right of
[Learn] at [Device Mapping].
! The place at which the function is to be assigned can also
be selected by clicking the field to the right of [Learn] at
[Device Mapping].
7 Click [Learn] again.
Turn [Learn] off.
8 Click [Close] at the bottom right of the screen.
Close the TRAKTOR 2 settings menu.
Setting the details of the functions
assigned to the [NEEDLE SEARCH] pad
 Setting the [Mapping Details]
— [Modifier Conditions]: Sets the operating conditions for the func-
tion selected at [Add In...].
The operating conditions are switched with the [Value] setting.
— [Type of Controller]: Selects [Button], [Fader/Knob], [Encoder], etc.
When assigned to [Function 1] – [Function 5], this is set to
[Button].
— [Interaction Mode]: Sets the way in which the functions of
TRAKTOR 2 and the controller are associated.
— [Hold]: The function operates while the button is pressed.
— [Toggle]: The function's properties switch each time the button is
pressed.
 Setting the [Button Options]
Even more detailed settings can be made depending on the settings at
[Type of Controller] and [Interaction Mode].
For example, when [Type of Controller] is set to [Button] and
[Interaction Mode] is set to [Hold], the [Invert] setting can be made.