English
SAVE THESE INSTRUCTIONS
Preparing the Citrus Juicer for Use
Always clean cone, sieve, sieve holder and spout before you use the appliance for the first time
(see 'Cleaning').
PARTS NAME:
A. Motor unit
B. Spout
C. Sieve holder
D. Sieve
E. Cone
F. Cover
G. Handle
How to use your appliance
1. Place the appliance on a firm, level surface out of the reach of children.
2. Put the Sieve holder on place correctly. (Fig 1)
3. Put on the sieve. (Fig 2)
4. Then insert the cone. (Fig 3)
5. Install the cover on handle of the motor unit. Add the food on the cone.
(Fig 4)
6. Plug in the power on. Press the handle and the juice will be extracted quietly
and quickly.
7. Place a vessel under the spout. There is a rubber stopper on the spout. Flip
the spout down to remove the stopper from the sieve holder, and then the
juice directly flows into the vessel. (Fig 5).
8. After you have finished, flip the spout up to prevent dripping and spilling juice.
9. Always clean the appliance immediately after use (see in 'Cleaning').
10. The power cord can be wrapped and stored at the bottom of the appliance.
( Fig 6)
Caution:
Do not operate the appliance longer than 5 minutes at one time. Allow a few
minutes rest before next use.
- 4 -