Durabase; Durabase Divider - Kenmore PRO 795.7998 Serie Manual De Uso Y Cuidado

PULLOUT DRAWERS
Tap Drawer
1. To remove, putt the drawer out to full extension. On
the left rail, use a fiat blade screwdriver to push in on
the tab to release the drawer from the rail, as shown
below. Once the left side is loose, push the tab on the
right side with your finger to release the drawer. Lift
the front of the drawer up, then putt it straight out.
2. To replace, slightly tilt up the front of the drawer,
insert the drawer into the frame, and push it back into
place.
DURABASE
]. To remove the Durabase, push it to the back as much
as possible. Tilt up the front of the Durabase and putt
straight out.
2. To replace, insert the Durabase in the rail assembly.
2. To replace, slightly tilt up the front of the drawer, insert
the drawer into the frame, and push the drawer back
into place until you hear a click.
Middle Drawer
1. To remove, putt the drawer out to full extension. Lift the
front of the drawer up, then putt it straight out.
J
DURABASE DIVIDER
The Durabase divider allows you to organize the
Durabase area into sections. It can be adjusted from side
to side to accommodate items of different sizes.
!/' ,,
WARNING; If the Durabase divider is removed, there is
enough open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow children or pets to
touch or go near the drawer.
28