Personal Safety - Urrea 23621 Manual De Usuario

PERSONAL SAFETY

• Pump should be operated by trained personnel
only
• Always wear Safety Goggles when using the
pump
• Always use Gloves when using the pump
• Do not point the discharge end towards
yourself or anyone as there is potential hazard
for injection into skin / eyes
• Never allow any part of the body to come in
contact with the operating fluid
• Before operating the pump , check hose for
signs of wear , leaks or loose connections. If hose
is weak , worn or damaged, replace the hose
immediately
• Incase of an accident, immediately seek
emergency medical attention. Do not try to treat
the injury yourself
• Use only genuine factory parts for repair
• Do not smoke when using / near the pump
• Do not use the pump near a source of spark /
open flames etc.
FEATURES
• High volume - High pressure grease pump,
ideal for greasing earth moving & agricultural
equipment, automotive
applications & anywhere where quick volume
greasing is required
• Aluminum Die Cast Pump Head with Air
Release Valve fitted on the Pump Head
• Variable Handle Setting allows convenient use
of the pump with grease of varying viscosity
• Steel Drum Cover, Bucket & foot Rest
• Built in Lift handle
• Rubber Lining Follower Plate for forcing out
trapped air in grease
• Includes 2 m x ¼" ID High pressure rubber hose
(SAE 100 R2) , fitted with steel handle , extension
& coupler
• Swivel Adapter at Pump outlet for convenient
handling of hose
• Pump develops upto 4000 PSI (275 BAR)
• Delivers upto 9 gms per stroke (1 oz. per 3 strokes)
• Select models are with wheels for ease of use
OPERATION INSTRUCTIONS
• This is a Hand Operated Pump & must only be
used by Hand Force. Never use foot , hammer ,
pipe etc. to operate the pump.
• To ensure that pump does not lift when in
use, keep one foot onto the Foot Rest provi-
ded. Never keep your foot onto the Drum Cover.
KNOW YOUR TOOL
Before taking this product, familiarize yourself
with all operating features and safety require-
ments.
1. VARIABLE HANDLE SETTING
2. PISTOL HANDLE FITTED WITH STEEL GREASE
EXTENSION.
3. AIR RELEASE VALVE.
4. HIGH PRESSURE HOSE.
5. STEEL BUCKET WITH FOOT REST.
6. LIFT HANDLE.
6
3
5
WARNING: Remove the pump from its
packaging and check all parts. Do not discard
the packaging until all parts has been examined.
INSTALLING ADJUSTMENT HANDLE
• Remove the pump assembly from the box .In
addition to the pump unit , there would be a
Lever Handle placed separately.
• Assemble the Lever Handle with the Connec-
ting Link.
• You have a choice of 3 holes into which the
pump piston could be assembled.
1. Hole Closest to the Connecting Link: Assembly
of the piston into this hole allows the pump to
develop High pressure upto 4000 PSI (275 BAR) &
deliver 4 gm of grease per stroke. This position is
suggested when using thick grease.
E N G L I S H
1
2
4
5