Integra Xmart OPTIMA-31 10K Manual De Usuario página 34

MANUAL DE USUARIO - OPTIMA-31 10K / 20K / 30K
Bypass mode Description
LCD display
Battery Test Description
LCD display
www.xmart-ups.com
When input voltage is within acceptable range and bypass is enabled, turn off the UPS and it will enter
Bypass mode. Alarm beeps every two minutes.
Only if UPS is connected to parallel system
When UPS is in AC mode or CVCF mode, press "Test" key for more than 0.5s. Then, the UPS will
beep once and start "Battery Test". The line between I/P and inverter icons will blink to remind users.
This operation is used to check the battery status.
Only if UPS is connected to parallel system
V. 170502-OPT-31 10K/20K/30K (SPANISH) -
32