Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ILti _ ;! I_i i _ r;! _ [o]_
PRODUCT
SPECIFICATIONS
HORSEPOWER
f 3 HP
DISPLACEMENT
20.85 cu. in.
GASOLINE
4 quarts
CAPACITY
(unleaded)
OIL CAPACITY
5W30
(28 oz capacity)
SPARK PLUG:
Champion RC12Y(
(Gap .030 in.) or
equivalent
VALVE CLEARANCE
Intake:
0.004 - 0.006 In.
Exhaust:
0.009 - 0.011 In.
SNOW THROWER
AUGER DRIVE BELT
Adjust the auger drive belt after the first
2 to 4 hours of use, again about mid-
season and twice each season thereaf-
ter (See "Belt Adjustment"
in the
Service and Adjustment section).
AUGER SHAFT LUBRICATION
EVERY 10 HOURS
1. Lubricate the Zerk fittings (A) every ten
hourswitha grease gun.
2. Each time a shear bolt is replaced,
the auger shaft MUST be greased.
See Figure 25. See To Replace Au-
ger Shear Bolt in the Service and
Adjustment
section.
A
Figure 25
AUGER GEAR BOX
The auger gear box is lubricated at the
factory and should not require addition-
al lubrication,
lffor some reason the
lubricant should leak out, have auger
gear case checked by a competent re-
pairman.
F-031068L
21
Publicidad
Tabla de contenido
