DeLOCK 42595 Manual Del Usuario página 3

English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Avoid anti-static electricity
Installation
1.
Open the housing. Pay attention to the snap nose.
2.
Put your Ultra Slim SATA drive in the enclosure.
3. Screw the enclosure with the drive on the respective positions, by the help of
the included screws.
4. Close the enclosure. All snap noses need to lock back in.
5.
Screw the enclosure on the bottom, with two screws.
6.
Stick the rubber feet into the recesses on the bottom.
7. Connect the USB cable with the enclosure and an available port of your
computer.
8. Switch on your computer.
9. The external drive will be recognized and you can start using the device
immediately.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 06/2020
-3-