Publicidad
Idiomas disponibles
Idiomas disponibles
Connection
1. Make sure the main power switch is in the off position.
2. Set the knobs (GAIN, AUX, FX, FADER, CD TAPE, EFFECTS, VOL Mp3)
minimum level.
3. Connect the speakers or amplifiers in the corresponding inputs.
4. Connect the microphone with the switch in the off position, if you connect
a PHANTOM microphone verify that the level of the volume control is turned
on and in minimum position.
5. If you connect a monitor ,take care to turn it off before installation.
6. When connecting external devices such as earphnes, USB, SD cards,
CD-player, Mp3, Smarthpone, Ipod, etc) verify that controls TAPE CD, Mp3
VOL, VOL PHONE are at the lowest level.
7. Connect the power cord and turn on the mixer, the digital display shows
a number of effect
8. Increase the volume level gradually until the sound output reaches the
desired level.
The following diagram is a suggestion, its mixer allows great flexibility ac-
cording to your needs.
12
12
Publicidad
