Publicidad
Idiomas disponibles
Idiomas disponibles
G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Controls and displays
1. Charging cradle
2. Function LEDs
3. Power button
4. Contact pins
5. USB port (Out)
6. Micro-USB port (In)
7. Adapter plate
8. Micro-USB plug
3. Package contents
• Power pack, 6000 mAh
• Micro-USB charging/connection cable
• Micro-USB adapter plate with adhesive pad
• These operating instructions
4. Safety Notes
• The product is intended for private, non-commer-
cial use only.
• Protect the product from dirt, moisture and over-
heating, and only use it in a dry environment.
• Keep this product, as all electrical products, out of
the reach of children!
• Do not drop the product and do not expose it to
any major shocks.
2
• Do not operate the product outside the power
limits given in the speci cations.
• Do not open the device or continue to operate it if
it becomes damaged.
• Dispose of packaging material immediately accord-
ing to locally applicable regulations.
• Since the battery is integrated and cannot be
removed, you will need to dispose of the product
as a whole. Do this in compliance with the legal
requirements.
• Do not modify the product in any way. Doing so
voids the warranty.
5. Operation
5.1 Charging the power pack
• Begin charging the power pack by connecting the
included Micro-USB charging/connection cable
to the power pack's Micro-USB (IN 5V/2A) input
and to a suitable USB charger. Please refer to the
operating instructions for the USB charger used.
• Charging begins and ends automatically.
• Charge the power pack fully before using it for
the rst time.
Note – Capacity
• The capacity is continuously shown when the
power pack is charging.
• Each status LED corresponds to 25% of the
capacity. When an LED is steadily lit, this
indicates that this capacity level has already
been reached. The power pack is charged to at
least 75% if three LEDs are illuminated and the
fourth is ashing.
• If all four status LEDs light up, the full capacity
is available.
• Press the button on the power pack to switch it
on and to check its current charge level.
Publicidad
