Cleaning - Gardenline 94689 Manual Del Usuario

3. Make markings on the wall where you want to install eye
(see step 3 in Fig. B).
bolts
6
4. Install eye bolts at all marked locations. Securely tighten
the eye bolts with pliers
5. Cut the rope
knotting (see Fig. C). Make sure the length of each piece is
long enough.
6. Thread one end of each piece of the rope through a
corresponding loop on the shade sail and then firmly tie in
a knot (see step 1 in Fig. D).
7. Thread the other end of that piece of the rope through a
spring
3
8. Connect the other end of a spring with a snap hook
(see step 3 in Fig. D).
9. Hang up the shade sail onto the wall by connecting each
eye bolt with a corresponding snap hook (see Fig. E).
10. Complete the rest of the installation following the above
steps. Your shade sail is ready to use (see Fig. F).

Cleaning

WARNING!
Risk of damage!
If you use unsuitable cleaning agents or utensils, you could
damage the shade sail.
− Do not use any aggressive abrasive, solvent-based, acid-
based or chlorine-based cleaners.
1. Use a mild detergent and a soft cloth or sponge to clean
the shade sail.
2. Let all parts dry completely before storing.
into several pieces that are used for
2
and then firmly tie in a knot (see step 2 in Fig. D).
(see step 4 in Fig. B).
7
Cleaning
4
11