Operating Mode - Quarkpro light QUASAR Manual Del Usuario

ENGLISH

Operating Mode

When laser is powered on, LED monitor on rear panel shows the current
operating standalone mode or DMX address of DMX mode. With help of LED
control panel, it is very easy to set and change the operating mode of laser. After
every resetting and saved, the new mode information will be shown on LED
monitor at next power on.
Mode/Function Option, to choose the operating mode of laser.
Confirmation, to confirm all setting or change of LED control panel.
UP/DOWN, to change operating mode, parameter or DMX address.
In the MODE OPTION setting, the stand alone laser show that you are going to
choose is flashing. Press UP or DOWN to change stand alone laser show, you will
have 6 different stand alone preprogrammed laser show. Their DISPLAY and
EFFECT are listed below:
LED DISPLAY
QUASAR
1 2
FUNC UP DOW N ENTER
STAND ALONE MODE LASER EFFECT
Auto+Sound ,Automatic cut over
Auto
Activated Moving Patterns Effect
9
USER MANUAL
3
QUARKPRO LIGHT