Product Components; Mechanical Installation; Install The Controller - HACH LANGE SC1500 Manual Del Usuario

Color Status
Green Normal operation
Red There is a communications problem between the controller and one or more of the attached
measurement devices. Refer to

2.3 Product components

Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 2 Product components
1 sc1500 controller
2 Strain relief fittings (quantity varies)
Section 3 Installation

3.1 Mechanical installation

3.1.1 Install the controller

Attach the controller upright and level on a flat, vertical surface. Refer to the illustrated steps in
Figure 3. Install the controller in a location where the power disconnect device for the controller is
easily operated.
Mounting hardware is supplied by the user. Make sure that the wall mounting is able to hold 4 times
the weight of the equipment.
As an alternative, attach the instrument to a panel, vertical pole or horizontal pole. Refer to the
instruction sheet supplied with the optional mounting kit.
Note: The optional sunshield is recommended for all outdoor installations.
2
The pole mounting hardware is for a 40 mm (1.57 in.) diameter pole.
6 English
Table 1 Status indicator light
Troubleshooting on page 21.
3 Pole mounting hardware for USB box
Figure 2. If any items are missing or
2