Operation
Using The AUX Input: Power off and lower the volume. Connect the output from the AUX source
(CD, DVD, Mixer, Mp3 player) to the AUX input on the rear of the sub-woofer base unit. Connect
the satellite speakers to the speaker outputs on the rear of the sub-woofer base unit. Power on
the and the AUX signal sources. Set the Input key to AUX. Slowly raise the volume to the desired
levels.
Using the USB/SD card Input: Power on and lower the volume. Put the USB flash drive or SD
card to the respective input. The system will automatically play the .mp3 files from the USB flash
drive or SD Card. To change the input press the input button until the unit is set to USB/SD.Slowly
raise the volume to the desired levels.
Using the Blue-connect Input:
1 Connect the line of Speaker, switch on the power of Speaker, press the (INPUT) on panel or
(MODE) on controller to turn the Speaker to Blue-connect, the Speaker can display a sound when
it turn to the mode of Blue-connect
2 Open the Bluetooth on mobile phone or other Bluetooth playback device
3 Scanning on mobile phone or other Bluetooth playback device, and connect when you find a
(SB-5628USDB)
4 After the connection, your favorite songs can be displayed on the mobile phone and the beautiful
voice issued from the Blue-connect.
5. There are no need any password for pairing. Once find SB-5628USDB, you can connect
automatically
Add schematic diagram
P-5