npg BS-N2020-DTHD Manual De Usuario página 23

(3.) Channel Search
To access the menu, press MENU and se-
lect [Search Channel] using
RIGHT/LEFT keys.
This Menu provides options to adjust the Se-
arch Channel settings.
Press UP/DOWN to select an option and
press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
(a) Auto Search
This option will automatically search for channels
and save them once the scanning is complete.
All previously saved channels and settings will be
deleted.
1. Select [Auto Search] and press OK to start chan-
nel search.
2. To cancel channel search, press EXIT. Any chan-
nels that have been found will be saved.
(b) Manual Search
This option allows you to scan for new channels without deleting previously saved
channels and settings.
1. Select [Manual Search] then press OK. The chan-
nel search screen will appear.
2. Press the RIGHT/LEFT key to select the channel
frequency.
3. Press OK to start searching channels
If a channel is found, it is saved and added to the
channels list.
If channels can't be found during searching, the unit
will exit automatically.
the
(c) Country
Select your country of residence
(d) Antenna Power
Enable antenna power if an external active antennal is connected.
(4.) Time Setting
To access the select [Time] using the
RIGHT/LEFT keys.
The Menu provides options to adjust the
time settings.
Press UP/DOWN to select an option and
press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
(a) Time offset
Select auto or manual for GMT offset adjustments
(b) Country Region
Select the Country Region when [Time Offset] is set to Auto.
(c) Time Zone
Select the Time Zone offset when [Time Offset] is set to Manual.
(5.) Time Setting
To access the Menu, press MENU and select [Option] using the RIGHT/LEFT keys.
The menu provides options to adjust the OSD Language, Subtitle Language and
Audio language.
Sound Bar BS--N2020-DTHD
ENGLISH 21